Radix创建虚拟FPSO培训环境以降低调试阶段风险

Radix Creates Virtual FPSO Training Environment to Reduce Commissioning Phase Risks

; o" F8 Z1 ~7 j, o

2 G8 r/ Q- W' I: r+ c) F                               
登录/注册后可看大图

©Igor Kardasov/AdobeStock

Brazil-based Radix Software and Engineering said Monday it had created a virtual FPSO training environment for a major operator with the goal of reducing risk in the asset commissioning phase by training operators in process optimization and validation of operational manuals.
* ?" Q2 Y3 X) ^$ W- Z3 n9 y"The performance of professionals involved in the commissioning and operation of industrial units - specifically an FPSO - has been significantly impacted by the increased complexity of its units, equipment, and control systems. With this, the risk of deviations in the execution of operational activities such as start-ups and shutdowns have increased, with impacts mainly on safety, environment contamination, and operational efficiency," Radix said.
According to Radix, the company implemented a Proof of Concept (POC) to assess the latest technologies in integrated simulators for FPSO using AVEVA tools for it. The focus was the development of training with the use of integrated simulators, for the operation and commissioning teams.
In January 2022, the "Training in pre-operation and start-up of the FPSO Test Separator with the use of digital technologies," Radix said.
"The premise was that the teams could perform the following initial checks virtually, without assistance from the shipyard site: start-up to steady-state operation, occurrence of disturbances, shutdown procedures, failures in equipment and instruments scenarios, specific commissioning procedures, abnormal process conditions: changes in load characteristics or product specification and operation interlocks and emergency stop checks," Radix explained,.
" f( z. _3 \9 K7 P* T. O( V% rPer Radix, activities included: Pre-start-up alignment activities of the test separator; Start-up activities and continuous operation of the test separator, with the virtual plant operated for more than 5 hours and producing more than 900 m³ of “virtual oil" and test separator shut-down activities.
José Ramos, Radix technical leader for the project, said: "The integrated development and training of these teams in the above-mentioned activities will have a significant impact on improving the safety, operational efficiency, and emission reduction aspects of our future FPSOs."
Ramos said that with this, "we understand that the use of simulators integrated in the commissioning and operation of an FPSO is a solution capable of" optimizing processes to maximize value creation, proactively adopt technological solutions as a performance lever, and promoting   value generation and resilience in the transition to low carbon.”